English	Bulgarian	Contact Us:

Home Metal detectors: PI907, PI807-KIT, PI701-KIT. Characteristics Metal detector PI 907 Metal detector PI 807-KIT Do-it-yourself Metal detector PI 701-KIT Do-it-yourself Theory of impulse metal detectors Spy detector Antennas: Do-it-yourself Bee poison History	Metal detector PI 701-KIT Do-it-yourself Micro processor impulse metal detector with an LCD display. Construction kit. The device is made to be assembled at home. To put it all together, you don't need any special knowledge on electronics. All parts of the device have been already smoldered for you. What you have to do is use a screw-driver and attack the cabel to the coil. Two 12V, 1600 mAh rechargeable batteries are used for the power supply. They are connected to the conducters, comming from the power switch, as shown in the construction manual. The amplitude of the input signal is displayed on the LCD screen. The metal detector has only one varying resistor for adjusting the sound volume. Any other setting or adjustments are not required. Included in the package: Smoldered and tested scheme plate LCD indicator Power supply switch Potentiometer for the sound volume Small testing coil - 1-3 inches ( 2,5 - 7 cm) Instructions on a CD Information on making coils with a diameter from 2 to 100 centimeters Assembling a PI 701 KIT: Mounting the scheme plate and the indicator in a suitable box. (The box is not included in the package. Installing the power supply switch ( included in the package) and the slot for the headphones ( included in the package) on the box. Making the coil/coils Inserting the batteries ( not included in the package). Switching the metal detector on: Connect the coil with the listed in the manual conductor to the imput of metal detector Plug the headphones in the listed input Turn the changeable volume resistor to an average value Switch on the power supply Wait between 15 and 30 seconds The metal detector is ready for use Characteristics metal detectors:-PI907, PI 807, PI701 Price: PI 701 KIT - 100 EUR + delivery

Metal detector PI 701-KIT Do-it-yourself

Spy detector

Antennas: Do-it-yourself

Bee poison

History

Metal detector PI 701-KIT Do-it-yourself

Micro processor impulse metal detector with an LCD display. Construction kit.

The device is made to be assembled at home. To put it all together, you don't need any special knowledge on electronics. All parts of the device have been already smoldered for you. What you have to do is use a screw-driver and attack the cabel to the coil. Two 12V, 1600 mAh rechargeable batteries are used for the power supply. They are connected to the conducters, comming from the power switch, as shown in the construction manual. The amplitude of the input signal is displayed on the LCD screen. The metal detector has only one varying resistor for adjusting the sound volume. Any other setting or adjustments are not required.

Included in the package:

Smoldered and tested scheme plate
LCD indicator
Power supply switch
Potentiometer for the sound volume
Small testing coil - 1-3 inches ( 2,5 - 7 cm)
Instructions on a CD
Information on making coils with a diameter from 2 to 100 centimeters

Assembling a PI 701 KIT:

Mounting the scheme plate and the indicator in a suitable box. (The box is not included in the package.
Installing the power supply switch ( included in the package) and the slot for the headphones ( included in the package) on the box.
Making the coil/coils
Inserting the batteries ( not included in the package).

Switching the metal detector on:

Connect the coil with the listed in the manual conductor to the imput of metal detector
Plug the headphones in the listed input
Turn the changeable volume resistor to an average value
Switch on the power supply
Wait between 15 and 30 seconds
The metal detector is ready for use

Characteristics metal detectors:-PI907, PI 807, PI701

Price:

PI 701 KIT - 100 EUR + delivery

Copyright 2003-2006	All materials here are copyright protected	e-mail:office@igkelectronics.com